Drain clogs are the call we get most often from Greenville. A city of this size runs a lot of kitchens, a lot of bathrooms, and a lot of rental units, and the drains in all of them accumulate grease, soap, hair, and debris at a steady pace. We handle that work, and we handle everything around it: water heater replacement, sewer line service, leak detection, fixture installation, repiping, and emergency calls when something goes wrong fast.
Greenville's housing stock covers a wide range, from older homes with galvanized or cast-iron pipe to newer builds on PEX supply systems, and the work varies accordingly. Landlords dealing with a backed-up unit, business owners whose restrooms are out of service, homeowners watching a water stain spread across the ceiling. Whatever brought you here, we cover the full scope of residential and commercial plumbing in Greenville, and we are the name behind the work.
The price depends on what the job actually is. A clogged kitchen drain and a slab leak are both plumbing calls, but they involve completely different amounts of access, time, and materials. What the fault turns out to be, and what has to come apart to reach it, are the things that move a quote in either direction.
When you call, we ask about the situation. You describe what you are seeing, and we scope the job on the phone. No-pressure estimates, priced up front, means you have a number before you decide whether to schedule. If the repair is opened and something unexpected is found, we tell you what changed and what the additional work involves before we proceed. You are not asked to approve anything without understanding what it covers.
Greenville properties vary enough that a flat answer to "what does it cost" is not an honest one.
Call (864) 894-5395, describe the situation, and we will give you a real number for the real job.
We are open every day from 8 AM to 9 PM, including weekends and evenings. For a rental property that cannot sit with a broken water heater, or a restaurant whose kitchen drain backed up before the dinner service, that range matters. We take short-notice calls and work urgent situations into the schedule as quickly as availability allows.
When you call, we confirm what is open and book from there. If the property has a tenant, we work out the timing on the call so the visit does not catch anyone off guard. A commercial space that has to stay open is a different coordination problem than a vacant unit, and we account for that when the appointment is set.
We do not promise a specific arrival window here, because that is a commitment that belongs on the call, not on a page. What we can say is that the schedule is confirmed before the visit, and the scope and price are settled at the same time.
When you call, have a basic description of the problem ready. Where in the house the issue is, whether the water is shut off, whether it is affecting one fixture or the whole building. That is enough to scope the job.
We will ask a few follow-up questions, give you the price, and confirm the visit. By the end of the call, you have a scheduled appointment and a clear picture of what the visit will cover.
Call (864) 894-5395.
Water hardness varies across this region, and mineral buildup is a real factor in how long a water heater tank, a set of faucets, or the supply lines inside the walls hold up. Scale deposits form on heating elements and inside pipe walls over time, reducing flow and shortening the life of appliances. A whole-house water softener installed on the main supply line addresses the problem at the source, before the water reaches any fixture. Installation covers unit sizing, supply line connection, a bypass valve for servicing, and a drain line for the regeneration cycle.
A home drawing from a private well has a different set of demands than one on a municipal line. Pressure tank performance, supply line condition, and water quality all need periodic attention that public-supply properties do not require. If the pressure drops, cycles rapidly, or the water changes character, the supply side is where the diagnostic starts.
The most useful thing you can do when a pipe is leaking or a fixture fails is get the water off. Every home has a main shutoff, typically near the water meter or where the supply enters the building. Knowing where it is before a problem happens is worth a few minutes of looking around now.
For a single fixture, the isolation valves under the sink or behind the toilet handle the shutoff without affecting the rest of the house. A quarter-turn ball valve closes fully with one motion. An older gate valve takes several turns and does not always seat cleanly, which is worth knowing before you are in a hurry.
Once the water is off, the damage stops accumulating. Dry the area around the leak as much as you can, keep electrical cords and rugs clear of standing water, and call us. We will scope the situation on the phone and confirm the visit.
A water stain that grows slowly, a floor that feels soft underfoot, a water bill that climbs without explanation. These are the signs of a leak that has been running for a while before it made itself visible. We locate hidden leaks using pressure testing and electronic detection methods, identifying where the line is failing before opening more of the structure than necessary. Slab leak detection is a specific part of this work, and the process is designed to find the location precisely so the repair is as targeted as possible.
A water heater that produces inconsistent temperatures, makes rumbling or popping sounds, or shows corrosion at the connections is telling you something about its condition. Sediment buildup on the tank floor is a common cause of efficiency loss and noise in older units. Whether the right answer is a repair or a replacement depends on the age of the unit and what the diagnostic finds. We handle both tank and tankless water heaters, and the situation is assessed on the call before the visit is confirmed.
A new shower or bath installation involves supply connections, drain rough-in, fixture mounting, and making sure the finished assembly holds pressure and drains cleanly. Permit requirements for this type of work vary depending on the scope and the property, and we confirm what applies before the job starts. The right fix is the one that matches the pipe, not the quickest patch, and that applies as much to installation work as it does to repair.
A washing machine or dishwasher that is not connected correctly creates two problems: a supply line that can fail under pressure, and a drain line that can back up into the appliance or the cabinet below it. We handle appliance plumbing connections as part of installation or as a standalone call when a connection is leaking or the drain is not clearing properly.
Galvanized steel pipe corrodes from the inside over time, narrowing the bore and eventually failing at the fittings. Polybutylene pipe, common in homes built through the 1990s, becomes brittle and develops cracks and joint failures as it ages. When either material reaches the point where repairs are no longer holding, a whole-home repipe with copper or PEX is the answer. We assess the existing system and walk through what the work involves before any pipe is touched.
A drain that is slowing down is easier to deal with before it backs up completely. The clearing method depends on where the blockage is and what caused it. A clog at the fixture is a different job from a main line packed with grease and debris. For buildup that a standard snake will not clear, hydro jetting uses pressurized water to clean the full interior of the pipe rather than just breaking up the immediate obstruction.
We cover Greenville and the neighborhoods and communities around it, including Dunean, Wade Hampton, Judson, City View, and Gantt. Calls from across Greenville County are part of the regular work we take on.
When you call, give us your address and we will confirm coverage on the spot. The area served is confirmed on the call, not guessed at from a list on a page. Anything not covered here is on our complete plumbing services page.
Permit requirements depend on the type and scope of the work, and they vary between project types. We confirm what applies to your job before the visit is scheduled. Work carried out here is done to the code standards the local inspectors enforce.
Yes, a record of the work can be provided. If you are a landlord who needs documentation of a repair for tenant records, maintenance logs, or insurance purposes, mention that when you call and we will confirm what is included with the completed job.
A quote can change if the work reveals a condition that was not visible or known when the job was scoped, such as additional pipe damage behind a wall or a fitting that fails when it is disturbed. If that happens, we stop and explain what was found before the scope expands. Nothing additional proceeds without your approval.
Moving a bathroom involves extending or rerouting supply lines and drain lines to the new location, and the feasibility depends on the floor structure, the distance from the main stack, and the slope available for the drain run. We scope that kind of work on the phone first and then confirm the details on-site before any quote is finalized. It is a larger project but one we handle.
That is a question we settle when the job is booked rather than after the work is done. Some landlords want the invoice sent directly to them and others arrange for it to go through a property manager. Let us know the preferred arrangement when you call and we will set it up that way from the start.
Pets do not need to leave the property for most drain work, but keeping them away from the immediate work area is practical for their safety and for the work to proceed without interruption. If a specific product is being used in the drain, we will mention it on the call so you can make the right arrangements.
Older homes in Greenville frequently have galvanized steel supply lines that have corroded over time or polybutylene pipe that has become brittle. Both materials eventually reach a point where spot repairs are no longer the right answer. When that is the situation, we assess the full system, explain what we find, and walk through the options before any recommendation is made.
In most cases the water does not need to be off before the visit starts. The shutoff happens as part of the work, at the right point in the repair process. If there is a situation where turning the water off before the visit would help, we will tell you that on the call when the job is scoped.
Describe the situation when you call (864) 894-5395 and we will scope the job on the phone, give you the price, and book the visit before you hang up.
We are available every day from 8 AM to 9 PM. Drain cleaning, water heater replacement, sewer line service, leak detection, repiping, and emergency calls are all part of what we handle for Greenville properties. Call and we will take it from there.
You can browse our town-by-town list. Plumbing service reaches these neighboring areas too: Wade Hampton, Gantt, Mauldin.
We handle the full range of plumbing work for homes and commercial properties across Greenville and Greenville County. Whether the job is a slow drain, a failing water heater, a slab leak, or a main line backup, we scope the situation on the phone, confirm the price before anything is scheduled, and get the work done to the code inspectors here actually enforce. The table below lays out what each service covers and what to expect from the visit.
| Type of Job | What It Covers | Typical Situations | Worth Knowing |
|---|---|---|---|
| Water Pressure & Shutoff Valve Repair | Whole-house pressure diagnostics, Pressure regulator inspection, Shutoff valve replacement, Main and fixture isolation valve service | Low pressure at every fixture, a shutoff valve that will not close fully, or pressure that has dropped noticeably over time | A shutoff valve that will not close fully is a real liability during any plumbing emergency. Replacing it before a problem develops is straightforward work. |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless repair, Full unit replacement, Element and thermostat service, Connection and supply line work | No hot water, inconsistent temperatures, unusual sounds from the tank, or a unit showing error codes | Sediment buildup is a common cause of efficiency loss in tank units. The type of failure usually points clearly to whether repair or replacement makes more sense. |
| Garbage Disposal Service | Disposal repair for humming or non-spinning units, Leak repair at the collar or drain, Full disposal replacement, Drain connection service | A disposal that hums but will not spin, leaks under the sink, or has stopped responding entirely | A disposal that hums without spinning usually has a jammed plate, not a failed motor. The diagnosis determines whether repair or replacement is the right call. |
Call (864) 894-5395 to talk through what you are dealing with and get a price before anything is scheduled.
(864) 894-5395